​Shark Captain's Electric Anchor (Trolling Motor) Point-Crawling Function: A Complete Step-by-Step Guide!

Shark Captain's Electric Anchor (Trolling Motor) Point-Crawling Function: A Complete Step-by-Step Guide!

Captains, have you ever experienced this frustrating scenario on a fishing trip? On the same boat, anglers at the stern are hauling in fish non-stop and having a blast, while your buddy at the bow waits forever without a single bite. He gets so frustrated he starts complaining, "My spot is mud — there's no fish here at all."

It's not that the fishing spot is bad, nor is it that the captain lacks skill. Today, let's break down the point-crawling function of the Shark Captain Electric Anchor (Trolling Motor) in plain language. Once you understand how to use it, you'll never have to worry about dead bites onboard or conflicts between anglers again.

First, Understand: Why Do Different Anglers on the Same Boat Have Such Different Results?

Many novice anglers assume that a fish bed covers a vast area of water and that the boat can catch fish wherever it anchors. This is completely wrong.

Experienced anglers often refer to a "tiny coffee-table-sized spot." In plain terms, the real fish-holding area is only about the size of a small table or a bucket — roughly half a meter to a meter square. The large spots everyone can find simply don't hold many fish.

But our fishing boats are 7 to 8 meters short, and over 10 meters long — more than ten times the size of a fish bed. This means: only the spot directly above the fish bed catches fish. Anglers just 2 or 3 meters away simply won't reach the school.

This leads to the most frustrating situation: one person is catching fish like crazy while everyone else on board watches in frustration. Anglers get upset, they argue about moving the boat, and the captain is left scrambling.

What Exactly Is the Point-Crawling Function? Explained in One Sentence

Simply put, this function lets your boat automatically "walk" back and forth at a constant speed within a locked fish bed. No need to manually raise the anchor, no need for major boat adjustments. With the press of a button on the remote, you get:

✅ Every fishing position on the boat can take turns being precisely positioned over the fish bed — no favoritism, no gaps.

✅ Even the tiniest fish-holding spot can be scanned meter by meter, without wasting the golden fish bed.

✅ No need for you to steer — the boat moves by itself. You just sit back and watch everyone catch fish.

Experienced captains who've used it say this function is almost "too clever" — it has fully understood fish behavior and angler needs. It's truly a full-catch weapon.

Must-Read for Beginners! Three Amazing Benefits of This Function, Explained

1. Resolves Onboard Conflicts — When Everyone Catches Fish, That's Real Skill

The captain's biggest headache is anglers shouting, "Move me two meters!" and "Why do you only cater to him?"

With the point-crawling function, you don't need to manually move the boat back and forth. Just set the range — for example, 3 meters forward and 6 meters back — and the boat will automatically move back and forth within that range at a constant speed. Every position on board, front, back, left, and right, can take turns being over the fish bed. Everyone gets a chance to catch fish, and no one accuses you of playing favorites.

2. Master Even the Smallest Fish Bed — Beginners Can Locate Fish Precisely

A bucket-sized fish bed — manually anchoring and positioning the boat, you won't hit it right nine times out of ten. After all that fuss, the fish are long gone. The point-offset plus point-crawling function achieves precise movement meter by meter. Even a half-meter-wide fish-holding spot can have your rig positioned directly over it. You don't need decades of docking experience. A few presses on the remote, and even a beginner can precisely lock onto the fish bed.

3. Auto Bait Presentation — Trick Even Reluctant Fish into Biting

You've chummed the spot, the fish are there, but they just won't bite. This happens because in still water with no current, your bait lies motionless on the bottom, and fish have no interest in it. But as the boat crawls, the main line, leader, and rig move with the boat. The bait appears to swim like a live fish, drifting right in front of the fish's eyes. Fish that were too lazy to bite can't resist when they see the bait moving back and forth right in front of them. Even on a dead-bite day, this helps you trick fish into biting — doubling your catch rate.

✅ Complete Step-by-Step Guide — Beginners Can Learn It in One Read

Only 4 steps total. One-handed remote operation, no complex parameters. Practice once and you're ready:

1. After reaching the fishing spot, fully lower the Electric Anchor (Trolling Motor) unit into the water. Press the positioning button to stabilize the boat over the center of the fish bed you've located.
   
2. First press the current-cancellation (drift) button on the remote, then press the positioning button to activate the point-crawling mode.
   

3. In the settings, select the movement range — for example, 3 meters forward and 3 meters back. The front-to-back movement distance can be adjusted according to your needs.

1. Want to change direction? Simply adjust the angle. Any direction from 0 to 360 degrees. Move the boat forward/backward or left/right — it's up to you. The boat will automatically move back and forth at a constant speed within your set range. Just sit back and wait for the whole boat to catch fish.
   

Common Questions Answered for Beginners

* Can I use this function in rough weather? Absolutely. Even in strong wind and heavy current, the Shark Captain Electric Anchor (Trolling Motor) will move precisely within the range you set. It won't drift off course in the wind. It's rock steady.

* Can I use this when fishing solo with one boat? It's perfect for that! When fishing alone, you don't need to divide your attention between adjusting the boat and raising/lowering anchor. With the crawling function on, the boat automatically scans the entire fish bed for you. It's 10 times more efficient than manually moving the boat — just focus on fishing.

In fact, the Electric Anchor (Trolling Motor) does far more than just hold and stabilize the boat. Point-crawling is just one of many functions.

Like and save this article, follow us, and in the next installment we'll break down more hidden practical features of the Electric Anchor (Trolling Motor) — teaching you step by step how to go from beginner to deep-sea angling expert, with a full catch every trip out.

The Shark Captain Electric Anchor (Trolling Motor) has thought through every detail of offshore fishing for you,

so every captain can head out to sea with ease and return with a full load.